Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, M Manual do Utilizador descarregar pdf

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST

REGULATOR

Gooseneck Single Spout Kitchen Faucet

Installation Guidelines

Page 1 of 4

Rev

10.9.2014

These guidelines have been prepared for the professional contractor to aid in the installation of:

REGULATOR GOOSENECK SINGLE SPOUT KITCHEN FAUCET WITH METAL WHEEL HANDLE AND SPRAY

(STYLE No. RGKM20, RG20KM UK)

All dimensions are based on original specification and are subject to change and variation.

Please consult your Design Associate for current specifications.

STYLE No. RGKM20†

SPECIFICATIONS:

Deck Thickness Maximum: 2” (51mm)

Fittings Hole Ø [Temperature Valve]: Ø2-1/4” (57mm)

Fittings Hole Ø [Spout]: Ø1-3/4” (44mm)

Handle Turn Angle: Quarter Turn

Inlet Connection Size: 3/8”

Inlet Connection Type: Compression Connection Hoses†

Integrated Diverter: Yes

Restricted Maximum Flow Rate: 2.2gpm (8.3liters/min) ‡

Spout Reach: 10” (254mm)

Spout Swivel: Yes

Spray Hose Length: 79”

Water Pressure Minimum: 20 psi (1.4 Bar)

Water Pressure Maximum: 80 psi (5.5 Bar)

Water Pressure Recommended: 45 psi (3 Bar)

† UK Style No. RG20KM is supplied with 2 BSP adapters,

assembly required.

‡ Both spout and spray are flow regulated at 2.2gpm.

IMPORTANT:

 To ensure this product is installed properly, you must

read and follow these guidelines.

 The owner/user of this product must keep this

information for future reference.

 This product must be installed by a professional

licensed contractor. Be sure your installation conforms

to all federal, state, and local codes. In the State of

Massachusetts, all installations must comply with the

rules and regulations set forth within 248 CMR.

 Inspect the product to ensure you have all the parts

required for proper installation.

 Use only a strap wrench or protected/smooth-jaw

wrench on any finished surface.

 DO NOT use putty. Putty contains oil and can cause

permanent discoloration on certain materials such as

marble, granite and any porous surface.

 Refer to the specification and assembly drawings

attached. Product is sold partially assembled but

shown fully disassembled for illustrative and service

purposes only.

 This product requires 2 holes on the mounting surface.

The Temperature Valve requires a Ø2-1/4” [57mm]

hole. The Spout requires a Ø1-3/4” [44mm] hole. The

Spout can be installed on either the left or right side

of the Temperature Valve. The TUBE can be cut to

accommodate different on-center spreads. The max

on-center spread is 12” [305mm].

FIGURE – 01

TEMPERATURE VALVE INSTALLATION

 The TEMPERATURE VALVE only mixes hot and cold

water. It does not have a volume/on/off function.

1. Remove the TEE and CHECK VALVE HOUSINGS from

the HOSES on the TEMPERATURE VALVE BODY. See

FIGURE – 02.

2. Remove the NUT, METAL WASHER, and RUBBER

WASHER from the SHANK on the TEMPERATURE

VALVE BODY. Do NOT remove the O-RING beneath

the ESCUTCHEON. See FIGURE - 02.

3. Ensure that the HOSES are securely tightened to the

TEMPERATURE VALVE BODY, then insert the SHANK

through the Ø2-1/4” [57mm] hole on the mounting

surface making sure the O-RING is beneath the

ESCUTCHEON.

NOTE

: The HOSES are marked with colored ZIP TIES

to identify their function, Red for incoming hot supply

water, blue for incoming cold supply water and green

for outgoing mixed water. See FIGURE – 02.

12"

[305mm]

ADJUSTABLE

VALVE

Ø2-1/4"

[57mm]

SPOUT

Ø1-3/4"

[44mm]

SPOUT CAN BE

INSTALLED ON

EITHER THE

LEFT OR RIGHT

SIDE OF THE

VALVE

1 2 3 4

Installation Guidelines 1

Resumo do Conteúdo

Página 1 - Installation Guidelines

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST REGULATOR Gooseneck Single Spout Kitchen Faucet Installation Guidelines Page 1 of 4Rev - 01 10.9.2014

Página 2

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST REGULATOR Gooseneck Single Spout Kitchen Faucet Installation Guidelines Page 2 of 4Rev - 01 10.9.2014

Página 3

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST REGULATOR Gooseneck Single Spout Kitchen Faucet Installation Guidelines Page 3 of 4Rev - 01 10.9.2014

Página 4

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST REGULATOR Gooseneck Single Spout Kitchen Faucet Installation Guidelines Page 4 of 4Rev - 01 10.9.2014

Comentários a estes Manuais

Sem comentários

Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, M Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Acessórios para água Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, M. Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, Metal Wheel Handle and Spray User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para água Waterworks Regulator Gooseneck Single Spout Kitchen Faucet, M